IEC62196-1 Electric Vehicle Plugs and Connectors Cable Pull and Torque Test Apparatus
Complied Standards & Clauses
IEC 62196-1 Ed.4CDV 2020 clause 25.3 Figure 17 and table 11,
IEC60309-1: 2012 clause 23.3, etc.
Equipment Overview
This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque.
Pull is realized by single-phase speed-regulating motor to drive the eccentric mechanism, the motor speed is adjustable, to ensure the accurate time for each pull force applied; torque is achieved by releasing the torque weight by air cylinder.
Technical Parameters
| Operation Method | Button operation |
| Drive Mode | Motor and cylinder |
| Pull Force Weights | One set of pull force weights Can achieve 160N, 200N, 240N, 250N,500N, 600N |
| Torque Weights | One set of torque weights Can achieve 0.6N.m, 0.7N.m, 1.2N.m, 1.5N.m, 2.3N.m, 11N.m |
| Torque Arm | 100mm(Ф200mm) |
| Pull Frequency | 1cycle/s |
| Pull Cycles | 1-9999 cycles, can be preset, default 100 cycles |
| Torque Applied Time | 0-99H59M59S, can be preset, default 1min |
| Fixture | One set of universal fixtures |
| Equipment Dimensions & Weight | W1300*D800*H1300mm, the whole machine is about 150Kg |
| Power Supply | Single phase AC220V±10%, 60Hz, 10A |
Questions & Answers
Q: What is the Torque Weights for this device?
A: One set of torque weights which Can achieve 0.6N.m, 0.7N.m, 1.2N.m, 1.5N.m, 2.3N.m, 11N.m.
Q: What is the Pull Frequency for this device?
A: It is 1cycle/s.
Details:
Product Tags:
|
|
IEC62196-1 Electric Vehicle Plugs And Connectors Cable Pull And Torque Test Apparatus Images
|
